Dwyer Differential Pressure Gauge Dealers for Chandigarh

Dwyer Differential Pressure Gauge Dealers for Chandigarh

SERIES 2000 MAGNEHELIC® DIFFERENTIAL PRESSURE GAGES

Indicate Positive, Negative or Differential, Accurate within 1%

  • No Power Required
  • Low Cost
  • Used in Isolation/ Hospital Environments and Temporary Units (no power required)

Select the Series 2000 Magnehelic® Gage for a versatile low differential pressure gage with a wide choice of 81 models and 27 options to choose from. Using Dwyer’s simple, frictionless Magnehelic® gage movement, it quickly indicates air or noncorrosive gas pressures–either positive, negative (vacuum) or differential. The design resists shock, vibration, over-pressures and is weatherproof to IP67. Select the -HA High Accuracy Magnehelic® Gage option for an accuracy within 1% of full scale, located below in the Product Configurator. Also included with the –HA option at no extra cost are a mirrored scale overlay and a 6 point calibration certificate.

NIST CALIBRATION available in Product Configurator.

Note: May be used with Hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Please see Series AT-2000 for ATEX approved.

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity with Dwyer Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication
ModelDescription
2000-0Differential pressure gage, range 0-0.50″ w.c., minor divisions .01, calibrated for vertical scale position.
2000-0-SPDifferential pressure gage, range 0-0.50″ w.c., with set point indicator.
2000-00Differential pressure gage, range 0-0.25″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-00AVDifferential pressure gage, range 0-0.25″ w.c., velocity 300-2000 FPM, calibrated for vertical scale position.
2000-00NDifferential pressure gage, range .05-0-.2″ w.c., minor divisions .005, calibrated for vertical scale position.
2000-0AVDifferential pressure gage, range 0-0.50″ w.c., velocity 500-2800 FPM, calibrated for vertical scale position.
2000-0DDifferential pressure gage, range 0-0.5″ w.c. & 0-125 Pa.
2000-1.5KPADifferential pressure gage, range 0-1.5 kPa, minor divisions .05.
2000-100CMDifferential pressure gage, range 0-100 cm w.c., minor divisions 2.0.
2000-100MMDifferential pressure gage, range 0-100 mm w.c., minor divisions 2.0.
2000-100PADifferential pressure gage, range 0-100 Pa, minor divisions 2.0, calibrated for vertical scale position.
2000-10KPADifferential pressure gage, range 0-10 kPa, minor divisions .20.
2000-10MMDifferential pressure gage, range 0-10 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-125PADifferential pressure gage, range 0-125 Pa, minor divisions 5.0, calibrated for vertical scale position.
2000-150CMDifferential pressure gage, range 0-150 cm w.c., minor divisions 5.0.
2000-150MMDifferential pressure gage, range 0-150 mm w.c.
2000-15CMDifferential pressure gage, range 0-15 cm w.c., minor divisions .50.
2000-15KPADifferential pressure gage, range 0-15 kPa, minor divisions .50.
2000-15MMDifferential pressure gage, range 0-15 mm w.c.
2000-1KPADifferential pressure gage, range 0-1 kPa, minor divisions .02.
2000-200CMDifferential pressure gage, range 0-200 cm w.c., minor divisions 5.0.
2000-200MMDifferential pressure gage, range 0-200 mm w.c.
2000-20CMDifferential pressure gage, range 0-20 cm w.c., minor divisions .50.
2000-20KPADifferential pressure gage, range 0-20 kPa, minor divisions .50.
2000-250CMDifferential pressure gage, range 0-250 cm w.c., minor divisions 5.0.
2000-250MMDifferential pressure gage, range 0-250 mm w.c.
2000-250PADifferential pressure gage, range 0-250 Pa, minor divisions 5.0.
2000-25CMDifferential pressure gage, range 0-25 cm w.c., minor divisions .50.
2000-25KPADifferential pressure gage, range 0-25 kPa, minor divisions .50.
2000-25MMDifferential pressure gage, range 0-25 mm w.c., minor divisions .50.
2000-2KPADifferential pressure gage, range 0-2 kPa, minor divisions .05.
2000-300CMDifferential pressure gage, range 0-300 cm w.c., minor divisions 10.0.
2000-300MMDifferential pressure gage, range 0-300 mm w.c.
2000-300PADifferential pressure gage, range 0-300 Pa, minor divisions 10.0.
2000-30KPADifferential pressure gage, range 0-30 kPa, minor divisions 1.0.
2000-30PADifferential pressure gage, range 0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-3KPADifferential pressure gage, range 0-3 kPa, minor divisions .10.
2000-4KPADifferential pressure gage, range 0-4 kPa, minor divisions .10.
2000-500PADifferential pressure gage, range 0-500 Pa, minor divisions 10.0.
2000-50CMDifferential pressure gage, range 0-50 cm w.c., minor divisions 1.0.
2000-50MMDifferential pressure gage, range 0-50 mm w.c., minor divisions 1.0.
2000-5KPADifferential pressure gage, range 0-5 kPa, minor divisions .10.
2000-60PADifferential pressure gage, range 0-60 Pa, minor divisions 1.0, calibrated for vertical scale position.
2000-6MMDifferential pressure gage, range 0-6 mm w.c., minor divisions .20, calibrated for vertical scale position.
2000-750PADifferential pressure gage, range 0-750 Pa, minor divisions 25.0.
2000-80CMDifferential pressure gage, range 0-80 cm w.c., minor divisions 2.0.
2000-80MMDifferential pressure gage, range 0-80 mm w.c., minor divisions 2.0.
2000-8KPADifferential pressure gage, range 0-8 kPa, minor divisions .20.
2001Differential pressure gage, range 0-1.0″ w.c., minor divisions .02.
2001-SPDifferential pressure gage, range 0-1″ w.c., with set point indicator.
2001AVDifferential pressure gage, range 0-1.0″ w.c., velocity 500-4000 FPM.
2001DDifferential pressure gage, range 0-1.0″ w.c. & 0-250 Pa.
2002Differential pressure gage, range 0-2.0″ w.c., minor divisions .05.
2002-SPDifferential pressure gage, range 0-2″ w.c., with set point indicator.
2002AVDifferential pressure gage, range 0-2.0″ w.c., velocity 1000-5600 FPM.
2002DDifferential pressure gage, range 0-2.0″ w.c. & 0-500 Pa.
2003Differential pressure gage, range 0-3.0″ w.c., minor divisions .10.
2003DDifferential pressure gage, range 0-3.0″ w.c. & 0-750 Pa.
2004Differential pressure gage, range 0-4.0″ w.c., minor divisions .10.
2004DDifferential pressure gage, range 0-4.0″ w.c. & 0-1.0 kPa.
2005Differential pressure gage, range 0-5.0″ w.c., minor divisions .10.
2005-SPDifferential pressure gage, range 0-5″ w.c., with set point indicator.
2006Differential pressure gage, range 0-6.0″ w.c., minor divisions .20.
2006DDifferential pressure gage, range 0-6.0″ w.c. & 0-1.5 kPa.
2008Differential pressure gage, range 0-8.0″ w.c., minor divisions .20.
2008DDifferential pressure gage, range 0-8.0″ w.c. & 0-2.0 kPa.
2010Differential pressure gage, range 0-10″ w.c., minor divisions .20.
2010-SPDifferential pressure gage, range 0-10″ w.c., with set point indicator.
2010AVDifferential pressure gage, range 0-10″ w.c., velocity 2000-12500 FPM.
2010DDifferential pressure gage, range 0-10″ w.c. & 0-2.5 kPa.
2015Differential pressure gage, range 0-15″ w.c., minor divisions .50.
2015DDifferential pressure gage, range 0-15″ w.c. & 0-3.7 kPa.
2020Differential pressure gage, range 0-20″ w.c., minor divisions .50.
2025Differential pressure gage, range 0-25″ w.c., minor divisions .50.
2030Differential pressure gage, range 0-30″ w.c., minor divisions 1.0.
2040Differential pressure gage, range 0-40″ w.c., minor divisions 1.0.
2050Differential pressure gage, range 0-50″ w.c., minor divisions 1.0.
2060Differential pressure gage, range 0-60″ w.c., minor divisions 2.0.
2080Differential pressure gage, range 0-80″ w.c., minor divisions 2.0.
2100Differential pressure gage, range 0-100″ w.c., minor divisions 2.0.
2150Differential pressure gage, range 0-150″ w.c., minor divisions 5.0.
2201Differential pressure gage, range 0-1 psi, minor divisions .02.
2202Differential pressure gage, range 0-2 psi, minor divisions .05.
2203Differential pressure gage, range 0-3 psi, minor divisions .10.
2204Differential pressure gage, range 0-4 psi, minor divisions .10.
2205Differential pressure gage, range 0-5 psi, minor divisions .10.
2210Differential pressure gage, range 0-10 psi, minor divisions .20, MP option standard.
2215Differential pressure gage, range 0-15 psi, minor divisions .50, MP option standard.
2220Differential pressure gage, range 0-20 psi, minor divisions .50, MP option standard.
2230Differential pressure gage, range 0-30 psi, minor divisions 1.0, HP option standard.
2300-0Differential pressure gage, range 0.25-0-0.25″ w.c., minor divisions .01, calibrated for vertical scale position.
2300-100PADifferential pressure gage, range 50-0-50 Pa, minor divisions 2.0, calibrated for vertical scale position.
2300-10CMDifferential pressure gage, range 5-0-5 cm w.c., minor divisions .20.
2300-120PADifferential pressure gage, range 60-0-60 Pa, minor divisions 2.0.
2300-1KPADifferential pressure gage, range 0.5-0-0.5 kPa, minor divisions .02.
2300-20MMDifferential pressure gage, range 10-0-10 mm w.c., minor divisions .50, calibrated for vertical scale position.
2300-250PADifferential pressure gage, range 125-0-125 Pa, minor divisions 5.0.
2300-30CMDifferential pressure gage, range 15-0-15 cm w.c., minor divisions 1.0.
2300-3KPADifferential pressure gage, range 1.5-0-1.5 kPa, minor divisions .10.
2300-4CMDifferential pressure gage, range 2-0-2 cm w.c., minor divisions .10.
2300-500PADifferential pressure gage, range 250-0-250 Pa, minor divisions 10.0.
2300-60PADifferential pressure gage, range 30-0-30 Pa, minor divisions 1.0, calibrated for vertical scale position.
2301Differential pressure gage, range 0.5-0-0.5″ w.c., minor divisions .02.
2302Differential pressure gage, range 1-0-1″ w.c., minor divisions .05.
2304Differential pressure gage, range 2-0-2″ w.c., minor divisions .10.
2310Differential pressure gage, range 5-0-5″ w.c., minor divisions .20.
2320Differential pressure gage, range 10-0-10″ w.c., minor divisions .50.
2330Differential pressure gage, range 15-0-15″ w.c., minor divisions 1.0.

Leave a Reply

Your email address will not be published. Required fields are marked *